Charger/discharger complex

PITE3986 intelligent charging and discharging integrated tester set charging, discharge, monomer detection, on-line monitoring and activation of five-in-one, a machine. Reduce business costs, reduce the labor intensity of maintenance personnel for the battery and UPS power supply maintenance to provide a comprehensive scientific means of detection.

Design features
Product function
Technical parameter

Light weight with rolling wheel for convenient operation

Suitable for all standby batteries and power batteries: 2V, 6V and 12V

Multi-function in one unit: it uses 3-phase charging, constant current discharging, cell test, optional online monitor and battery activation

Multi-condition for operation auto-stop: time out, maximum capacity, minimum voltage threshold (for battery or string)

It adapts PTC ceramic resistor which secures your discharging

Lag-out batteries could be automatically sorted, and activation function is used to enhance their performance

Instead of merely a load bank, it has optional wireless communication to monitor each battery voltage in discharging

State-of-the-art technique of soft-off for battery charging

Graphical display, showing test result with curves

Direct USB drive for convenient data transfer to PC

Over voltage protection and under voltage warning function

Thermal protection, auto stop in overheating and auto start in normal temperature

Powerful data view software for complex data analyzing and report printing

● Real-time online monitoring: real-time online monitoring, display all test data: current, battery voltage, battery voltage, time, capacity, while the data stored and sent to the PC, display and print a variety of charts.
● Automatic charge and discharge function: set the charge / discharge current, duration, capacity and voltage of the high and low limits, you can cycle a discharge, the charging process.
● battery activation function: set the number of discharge cycles can be activated on the battery.
● Automatic shutdown function: automatically stop / charge when any of the following conditions is met: time to, capacity to, single battery protection voltage and the entire battery protection voltage to.
● Protection function: if voltage abnormality occurs, it will stop charging or discharging automatically.
● voltage and current display value of the calibration correction function: the main calibration of the battery voltage, current and single cell voltage.
● U disk data dump function: charging, discharging, automatic charging or battery activation after the end of the collection of data can be dumped to the U disk, then the U disk will put / charge collected data transferred to the PC machine, After supporting the data processing software processing, display, print a variety of charts. In order to determine the merits of the entire group or single cell to provide a scientific basis.
● RS232 interface communication: real-time computer monitoring or charging, discharging, automatic charging or battery activation after the end of the data dump.

Parameter	Testing range	Resolution & accuracy
Nominal voltage	220V	Null
Max discharge current	50A	Null
Max charge current	30A	Null
Operating Time	0～99h 59m	Null
Total discharging voltage	10～288V	Resolution: 0.1V Accuracy: 0.5%
Total charging voltage output	176～288V	Resolution:0.1V Accuracy:0.5%
Charge/discharge cell voltage	0.000V～16.00V	Resolution: 0.1V Accuracy: 0.5%

Back

Charger/discharger complex

PITE - 3986 Charger/discharger complex